Hello and welcome back to another installment of my “A Pilot’s Life Storyteller Series”. As you might recall when we were last together, we landed in Las Vegas (Alaska Flight 634) and were due to return back to Seattle that afternoon/evening. Let’s get right into the action.
Present Day
I’m still contemplating my options as it relates to my career with Alaska. I will admit that a change of scenery will do well for me. My contract with Alaska is up and in reviewing the job offers out there, I do have options.
As you can see below, Alaska has offered me the option to move to San Francisco and work in what was the old Virgin America division. The pay is a step forward as my current pay rate is $39.39 per hour and Alaska is offering me $39.55. The next best choice for me would be to leave Alaska and of that list, Southwest Airlines is the most attractive. Southwest has offered me a job before and each time they up the ante. So I’d rather keep moving up if at all possible. Decisions…decisions.
Flight Details
This is the return flight from Las Vegas back to Seattle, Alaska flight 635. Our planned fuel for this trip back to Seattle is 19,640 lbs and our TOW is 161,731. Our cruising altitude will be 34,000 with a total block time of 2 hours and 36 minutes.
Flight Plan: SHEAD1 OAL LOMIA LKV HAWKZ7
Are you Ready?
We’re running slightly late as we had a passenger who hadn’t boarded, so their bags had to be removed from the aircraft as standard procedure. The ground crew needs to move a cart out of the way and then bring the tug around. We’ll be pushing back in just a few minutes.
Push back underway and along with that is engine start.
Tug disconnected and we’re given the all clear.
Leaving Las Vegas
Climbing out on our departure SID.
A noticeable Washington landmark just above the clouds off the right wing. (Mount Rainer)
Typical cloudy afternoon as we make our way along the arrival route.
The view from my office window.
Almost home as we fly near downtown Seattle.
Hello Boeing…..
Safely back where we started about 6 hours earlier.
I’m not scheduled to fly for a few days and need to give Alaska Airlines my decision by end of the week if I want to consider the move to SFO. I’ll admit, I’m certainly leaning in that direction.
Credits
If you are interested in experiencing your own “A Pilot’s Life”, I highly recommend the A Pilot’s Life, by SimBitWorld add-on for Prepar3D, FSX and X-Plane. You can learn more about the A Pilot’s Life by visiting the SimBitWorld website and/or purchase APL at SimMarket. Also, please read my full review of A Pilot’s LIfe here.
Flight Simulator: Prepar3D v4.5 (hotfix 1) Aircraft: PMDG 737-900 Airline: Alaska Airlines (ASA) ATC: VATSIM Airport Scenery: KSEA Drzewiecki Design, KLAS FlyTampa Terrain Scenery: Orbx Global Base, Orbx Vector, Orbx openLC North America, Orbx NA Pacific Northwest, Orbx Northern California, Orbx Southern California Sky/Cloud Textures: REX 5 SkyForce and REX 5 Environment Force Weather Generation: ActiveSky (ASP4) Flight Planning: SimBrief, Navigraph, FlightAware, FlightRadar24
Good morning, good afternoon and/or good evening and thank you for returning to our 5th installment in this Storyteller series focusing on A Pilot’s Life. A few things to catch you up on. In the last installment, we traveled from Ketchikan back to Seattle. This was the last flight of the month as I completed it on 31 May. As I get paid monthly, I received a nice paycheck on 1 June and have already made a few strategic purchases which will assist me in gaining more XP per flight. As you can see from the screenshot below of the main APL program screen, my bank account has had a nice $2,253.60 in it.
After purchasing two items in the APL Shop which consisted of a mobile phone and a flight bag, I now only have $983.60. These two purchases will earn me an additional 15% XP per each flight and help me to gain my promotion to the rank of Captain just a little quicker.
While I could have purchased the headset instead of the mobile phone and gained a total of 20% XP, I’m trying to be somewhat practical with these purchases. After all, who doesn’t own a cell phone in this day and age. Next month I’ll make additional purchases.
Present Day
I’m hearing about an opportunity I may soon have to transfer down to San Francisco. As a Sr. First Officer who will soon be moving up and over to the left seat as Captain, I suppose Alaska is looking to ensure I stay both motivated as well keep from burning out by flying back and forth from Sea-Tac. I must admit that I do like the idea of a change of scenery. SFO was the main hub for Virgin America and after the merger, Alaska kept SFO as a hub. I’ll be sure and keep you informed if this move becomes reality.
Flight Details
Today we’re operating Alaska flight 634 with service from Seattle down to Las Vegas. Our flight departs at 10:30 AM. Our planned fuel for this trip is 31,335 lbs and our take off weight is 162,046 lbs. with a cruising altitude of 35,000 feet. Our block time is 2 hours and 38 minutes.
Flight Plan: SUMMA1 LKV RYANN J92 BTY SUNST4
Let’s Get Going
This will be a turnaround flight for me. While I enjoy the overnight stays in Vegas, my bank account can do without the possible gambling losses which might be incurred if I were to not have the best of luck. Let’s face it, my luck in Vegas the past few trips hasn’t been the best. I lost BIG TIME at the roulette table and ended up falling off the mechanical bull. But as they say….what happens in Vegas, stays in Vegas.
Today we’re flying the Boeing 737-900 with the special 100th year Boeing livery. ServAir is stocking up the aircraft galley.
Next of course comes the bags. We’re set for an on-time departure.
A little help from our friends…
Holding short at 16L
Blasting off and on the way to Vegas.
Just a little hazy this morning. We’re now above the clouds of the Seattle area. Nothing but clear skies to Vegas.
Ladies and gentlemen, if you direct your attention to the left side of the aircraft you’ll see the Vegas strip where I’m sure all of your hard earned money will be left. Welcome to Vegas Baby!
Typical Vegas weather has us landing on the 26’s.
Lake Mead in the background.
Easy does it. I personally love this photo. The sky, the shadows.
Some Southwest aircraft parked at LAS.
At our gate and shutting down. The ground crew needs to get us turned around in less than an hour.
That’s all for now. Tune back in next time for the flight back to Seattle.
Credits
If you are interested in experiencing your own “A Pilot’s Life”, I highly recommend the A Pilot’s Life, by SimBitWorld add-on for Prepar3D, FSX and X-Plane. You can learn more about the A Pilot’s Life by visiting the SimBitWorld website and/or purchase APL at SimMarket. Also, please read my full review of A Pilot’s LIfe here.
Flight Simulator: Prepar3D v4.5 (hotfix 1) Aircraft: PMDG 737-900 Airline: Alaska Airlines (ASA) ATC: VATSIM Airport Scenery: KSEA Drzewiecki Design, KLAS FlyTampa Terrain Scenery: Orbx Global Base, Orbx Vector, Orbx openLC North America, Orbx NA Pacific Northwest, Orbx Northern California, Orbx Southern California Sky/Cloud Textures: REX 5 SkyForce and REX 5 Environment Force Weather Generation: ActiveSky (ASP4) Flight Planning: SimBrief, Navigraph, FlightAware, FlightRadar24
A few weeks ago I discussed the completely out of the blue announcement Microsoft dropped on the world regarding their planned release of what they have titled “Microsoft Flight Simulator”. Of course depending on what you are reading and where you are reading it, you might also see it referenced as Microsoft Flight Simulator 2020. The 2020 has been added by folks in the community simply because the anticipated release date is sometime in the year 2020.
Beware False Prophets
Almost overnight we’ve seen many in the community come out as “Experts” and “Insiders” when just about the only thing they are an expert or insider on is the art of BS. I find it extremely interesting that literally a few “no bodies” in the community were some how, or another privy to info from Microsoft, when many of the legit major players in the FSX and P3D communities were just as blinded sided as the rest of us. So my advice, is take anything you see/hear from some folks on YouTube as complete and udder BS for now. Some folks will do just about anything for a few extra clicks here and a few extra subs there….With that said….I’ll continue.
Word From Microsoft
Microsoft provided a bit of additional information a few weeks ago in the form of an announcement which can be read here. In this announcement, Microsoft attempted to clear the air on several important areas in the bullet points I’ve pasted below:
We are making Microsoft Flight Simulator. Emphasis on the word SIMULATOR.
Designed for PC, optimized for multiplatform support (e.g. Xbox).
Yes. We are supporting 3rd Party Content Development and Community Content creation. We are aware of the concerns in the current eco-system and are working to address them.
Yes. We genuinely want to work closely with the community in the development of this title.
Accessibility is important to us. Whatever your abilities are, if you want to fly, we are going to do whatever we can to make that happen. Yoke and pedals, mouse and keyboard, controller, etc. No pilot should be left behind.
My Thoughts
I’ve received a few emails from some of you asking about my thoughts and even asking for advice regarding the subject of MSFS 2020. Bottom line is I’m still hopeful and I’m also excited about what this could mean for the future of flight simulation. However, until we know even more than what we do now (and let me just say, we still don’t know a whole lot), I’m going to continue flying and enjoying Prepar3D version 4.
One of the big questions I’ve been asked more than once is whether or not I’m going to stop investing in P3D and P3D scenery. The assumption (and I agree) is anything currently available for FSX/P3D will not be compatible with MSFS 2020. I’ve often said that I believe at some point we’re going to need to yank the band-aid off and say goodbye to old/outdated add-ons that will only continue to be a boat anchor to any forward progress we want to have in any simulator. But in the mean time, if an add-on comes out for P3D that I’m truly interested in…then most likely I’ll purchase that add-on.
These are very exciting times we live in and I believe we best buckle our seat belt, as it looks like it will only get better. Remember, competition is always a good thing. Competition helps to produce better products, more affordable products and sometimes forces those who can’t keep up out of business. It’s just how business works.
The expectation is we may start hearing more from Microsoft later this summer (August timeframe). I’ll certainly be watching, listening and reading and may from time to time provide my opinions here on my blog site. But I think we’re all in a holding pattern until more is known. This is really all I know.
My R&R break in Ketchikan has drawn to a close and it’s time for me to get back to work. Perhaps not as much as I want to, but truly need to. It’s quickly approaching the end of the month of May (as I’m writing this) and as we only get paid once per month, I need to rack up as many flight hours as possible. This flight back to Seattle will be the last flight of the month. As also mentioned on the S1, E2 update, this flight also completes my current schedule with Alaska. I will receive another schedule upon my return to Sea-Tac. I’m still thinking about my future and most likely will discuss that next time.
Present Day
I truly enjoyed the past few days I’ve spent in Ketchikan. But it’s time for me to return back to work. Once again we have beautiful weather here and this will be a late afternoon departure back to Seattle. While the Ketchikan area has many endearing qualities, I think the people are what I truly like about my visits here.
Flight Details
Today we’re operating Alaska flight 9248 with non-stop service from Ketchikan back to Seattle. This flight originated in Anchorage and many of our passengers were part of that flight. Our flight departs at 19:35. Our planned fuel for this trip is 15,743 lbs and our take-off weight is 149,457 lbs. with a cruising altitude of 35,000 feet. Block time is 2 hours.
Flight Plan: ANN YJQ YYJ MARNR7
Let’s get going…
We’re in our standard livery today for this B738. We’re ready to go and just waiting on the ground crew to disconnect ground services and get the tug connected. Time is money…
Cleared to start engines and engine #2 is spinning up.
As we taxi up the hill towards runway 11, the sun is setting.
We’re lined up and waiting for our take-off clearance. We had a departing Cessna in front of us. While we have no worries from his lack of wake turbulence, the last thing that pilot wants to see in his rear-view mirror is a Boeing 738. But he’s headed for Sitka, so he’ll be turning and proceeding NW soon.
With the departing Cessna out of the way, it’s wheels up for Alaska 9248.
Continuing our climb up to FL350.
Beautiful weather for flying.
That just about does it for the sun for this day.
And now for the wing view.
Of course the problem with flying at night is…..
Cleared to land runway 16L at Sea-Tac.
Just a few more seconds…..
There we go…a smooth touchdown. Yea…I suppose it’s also good to be back home.
Parked at the gate and beginning our shutdown checklist.
As previously stated, this flight marks the end of my schedule. We get 10 flights scheduled to us at one time. My new schedule set has me returning back to Las Vegas, Portland, San Francisco, Salt Lake City and finally back up to Juneau.
As I don’t want to commit to any decisions at this time, I most likely will take the Las Vegas flights out and back. I should then be close to the end of the 7 day waiting period on my Sr. First Officer contract and will look at all my options. The deciding factors will be hourly salary and routes. As you can tell from the image below, these are the flights I’ve completed with Sun Country (based in KMSP) and Alaska (based in Seattle). I’d also still love to get hired by a 5 star airline like American, United etc. Time will tell.
Thanks for reading. I’ll keep you posted on my decisions. Talk to you once again soon.
Credits
If you are interested in experiencing your own “A Pilot’s Life”, I highly recommend the A Pilot’s Life, by SimBitWorld add-on for Prepar3D, FSX and X-Plane. You can learn more about the A Pilot’s Life by visiting the SimBitWorld website and/or purchase APL at SimMarket. Also, please read my full review of A Pilot’s LIfe here.
Flight Simulator: Prepar3D v4.5 (hotfix 1) Aircraft: PMDG 737-800 Airline: Alaska Airlines (ASA) ATC: VATSIM Airport Scenery: KSEA Drzewiecki Design, Orbx Ketchikan Terrain Scenery: Orbx Global Base, Orbx Vector, Orbx openLC North America, Orbx NA Pacific Northwest, NA Pacific Fjords Sky/Cloud Textures: REX 5 SkyForce and REX 5 Environment Force Weather Generation: ActiveSky (ASP4) Flight Planning: SimBrief, Navigraph, FlightAware, FlightRadar24
While I’ve been thinking about this subject for a few weeks, I really was prompted to actually sit down at the computer and pour my thoughts into WordPress for you all to read. The subject of this writing has to do with add-on developers duplicating each others efforts. Understand, I’m not referring to stealing, copying or anything underhanded.
Earlier today the flight simulation community learned a brand new Las Vegas, KLAS airport scenery had been released by scenery developer FlyTampa. I’m familiar with FlyTampa and own two of their add-on airports including TNCM (St. Maarten) and KTPA (Tampa). On my wish list I have Amsterdam (EHAM), Chicago Midway (KMDW), Boston (KBOS) and with the word MAYBE beside it I now have Las Vegas (KLAS).
For the past 8+ years I’ve owned the add-on scenery for Las Vegas from FSDreamTeam. For the most part, I’ve been very pleased with their scenery. As a matter of fact, I’ve been so pleased with FSDreamTeam that I own a total of 16 of their add-on airport sceneries. The only developer which tops them in the number of products I own would be Orbx. Anyway…
Back to the Question at Hand
Generally speaking, as consumers, we see duplication of effort everywhere we look. Go to the grocery store and you’ll find multiple brands of products that essentially do the exact same thing. Out on the highway, you’ll see different types of automobiles which all do the exact same thing. Even in the very industry we simulate through flight simulation we have Boeing versus Airbus and American versus United. Let’s also not forget we have Prepar3D versus XPlane. I think the saying, “Variety is the Spice of Life” comes to mind here. Also, competition is always a good thing.
But is competition such a good thing in our hobby? I’d say YES and NO!
In the example of FSDreamTeam’s Las Vegas, it’s been out for about 10 years. Originally developed for both FSX and FS9 (Flight Simulator 2004) and made compatible for Prepar3D (including v4) it is starting to show its age. Having said that, much of the other FSDT scenery I own (with exception of KMEM and KSDF) were all purchased for FSX and FSDT has updated them for P3Dv4 at no out of pocket cost. Said in another way, the vast majority of the 16 products I own from FSDreamTeam were purchased 7-10 years ago and the developer has worked to make them compatible with P3Dv4 and I didn’t have to spend any money. This is one reason why FSDT has remained one of my favorite developers and why I try to support them every chance I get.
Back to the competition question and why I say it’s both a good thing and a bad thing. First let’s get the bad out of the way. When I hear of an add-on developer creating airport scenery for an airport which already exists via another developer, I think to myself just how many other airports in the world which we don’t have represented with accurately detailed add-on scenery? In other words, instead of recreating an airport that already exists by an established developer…why not select another airport?
As for the reasons why it can be a good thing, well in the case of FSDT’s KLAS which was developed for FS9/FSX, FlyTampa’s KLAS is 100% P3Dv4 including PBR textures which of course is the brand new buzz word around the P3D community. LOL No, PBR doesn’t stand for Pabst Blue Ribbon…it stands for Physical Based Rendering and in simple terms PBR offers lighting techniques that treats light the way it really behaves in the real world. When applied to an aircraft (as an example), the materials which make up the aircraft look more realistic.
As I said…
Competition is a good thing. Not only can it help to keep the cost to the consumer low, it also can assist in keeping everyone on their toes. But if you blink….then bad things can happen. In the case of FSDreamTeam and their KLAS scenery…THEY BLINKED and FlyTampa pounced.
Like any other piece of software, FlyTampa didn’t decide last week or last month to develop their version of KLAS. Most likely it’s been in the works for some time. As I’ve stated before in other writings, compared to other gaming communities…the flight simulation community is rather small. These 3rd party development teams are also small in size. The PMDG wiki page states there are 8 employees. So these things take time. But in the case of FSDT, I see no signs they were planning to make any major updates to KLAS and with the recent hype around FlyTampa’s version, I’m most certain FSDT won’t bother.
Bottom Line
There’s very little brand loyalty in the flight sim community. If my wife sends me into the store to purchase a cold soda, I better come out with a red can in my hand. In other words, she drinks coca-cola or she’ll go without and I’ll get one of those looks if I even think otherwise. You know the look I’m talking about. Right?
On a related note, FSDreamTeam has been in the process of developing a version 2 for Chicago O Hare KORD. I believe it’s been in the works for almost two years. As is the case with most projects like this, no release date is known at this time. FSDT’s KORD will be amazing and it’s badly needed. However, another relatively new developer called Skyline Sim announced they were working on their own KORD (and other airports as well). Time will only tell…
For now, I plan to pull the trigger on FlyTampa’s version of Las Vegas. I’ll uninstall FSDT’s version and continue moving forward.
Thank you for returning for another edition of our “A Pilot’s Life” Storyteller series. When we were last together (S1, E2) I had just completed a flight from Seattle up to Ketchikan, Alaska. I mentioned I planned to spend a few days of R&R while there. So this edition won’t really be so much about the APL application as it’s just going to serve as a brief break from flying jets and give me some time to enjoy flying a little lower and slower and taking in all the eye candy that is this region of Alaska and Canada.
Present Day
I’ve been in Ketchikan the past couple of days and have just one full day before I’m due to return back to Seattle on Alaska flight 9249. This will complete my third schedule set with Alaska and I’ll apply for a new set and then see how things look once I’m eligible to apply for other airlines. But this week has all been about having some fun. The weather has been truly amazing with VFR flight conditions each day. So far I’ve managed to spend some time flying, fishing and just doing a little exploring. Mostly I’ve been able to relax and enjoy my time off. They say “membership has its privileges” and rightfully so. This is a pretty darn good life if you ask me.
As this is my last full day, I thought I would rent a Cessna 182 and depart Ketchikan and head east to Stewart, British Columbia, Canada. As I’m also trying to make friends where I can, I asked if there was anything which needed to go to or picked up from Stewart. As long as it would safely fit in a 182, I’m happy to take it. I’m really just planning to fly to Stewart, land and have lunch. Perhaps stroll through town and then head back to Ketchikan.
Doug (the guy that works at the rental desk) knows a guy that knows a guy that knows this other guy. Anyway, there is a package on Annette Island which needs to go to Dawson Creek. The timing isn’t an issue and they figure someone in Stewart will move it along. So the plan will be to depart Ketchikan, fly the 18nm to Annette Island, load the package and then head 76nm northeast to Stewart, BC. Sounds like a fun day.
Of course, we’re not going to fly as the crow would. Especially not on the second leg. I’ll take the safer and longer route and fly along the Portland Canal which makes up the border between the US (Alaska) and British Columbia (Canada).
It’s mid-morning and I show up at the Ketchikan rental facility and directed down to the lower level where my Cessna 182 is waiting for me.
As I’m taxing up the ramp, I see another Alaska 737-800 has just arrived. Most likely from Seattle.
The wind this morning is out of the north, so we’ll be departing runway 29.
Holding short runway 29 awaiting an approaching DHC-2 Beaver on final.
We’re issued our take-off clearance and we get moving. We were allowed to do a 180 degree turn and proceed direct to Annette Island.
Runway in sight, first leg is almost in the books.
We accept the package and quickly resume our travels. My stomach is already growling. I’ve heard there is a little cafe that makes a great burger in Stewart.
We’re back in the air and made our way across Duke Island and the Revilagigedo Channel. We’re now entering the canal. At this point in our flight we experienced a bit of turbulence as we crossed the channel. But all seems smooth for now.
Besides my stomach rumbling, we’re in no hurry and making great time. This second leg is obviously made longer since we didn’t go direct. But hey…I’m on vacation and the weather is amazing. So are the views.
At this point in the flight I’ve switched the auto-pilot off and just enjoying hand flying the aircraft along the canal. The air is nice and smooth.
I begin the descent into Stewart and the ride gets pretty bumpy and choppy.
The approach is an easy one. But at this point in the flight I’m feeling some pretty gnarly cross-wind action. Each time I think about taking a screenshot, I’m reminded I need to concentrate.
On the ground, safely….not too sure just how hungry I am at this point. But I’m sure once I park up and walk around a bit I’ll feel better.
Just spoke to the guy in the yellow shirt. He landed about 10 minutes before I did. I swear I saw him kneel down and kiss the ground just a minute ago. LOL It was a fun approach and landing. I’m thankful for rudder pedals.
Time to go find that $100 hamburger now. That older gentleman sitting down over there will take the package from me.
It’s been a fun, short and very adventurous flight. Looking forward to the return later this afternoon, then it’s back in the Boeing 738 and back to Sea-Tac.
Thanks for reading!
JT
Credits
If you are interested in experiencing your own “A Pilot’s Life”, I highly recommend the A Pilot’s Life, by SimBitWorld add-on for Prepar3D, FSX and X-Plane. You can learn more about the A Pilot’s Life by visiting the SimBitWorld website and/or purchase APL at SimMarket. Also, please read my full review of A Pilot’s LIfe here.
Flight Simulator: Prepar3D v4.5 (hotfix 1) Aircraft: A2A Cessna 182 Airline: n/a ATC: VATSIM Airport Scenery: Orbx Ketchikan (PAKT), Orbx Stewart (CZST) Terrain Scenery: Orbx Global Base, Orbx Vector, Orbx openLC North America, Orbx NA Pacific Northwest, NA Pacific Fjords Sky/Cloud Textures: REX 5 SkyForce and REX 5 Environment Force Weather Generation: ActiveSky (ASP4) Flight Planning: SimBrief, Navigraph, FlightAware, FlightRadar24, SkyVector
As I often say, unless you’ve had your head under a rock the past 48-72 hours, you’ve certainly heard about the BIG flight sim news. No, the biggest flight sim related news to break over this past weekend didn’t come from the halls of FSExpo19. As the curtains were all about to close on what appears to have been another extremely successful FlightSimExpo, Microsoft (yes…Microsoft) was making an announcement waaaaay over on the other side of the country, at the hugely popular E3 gaming conference in Los Angeles that they were returning to the flight simulation market in 2020 with Microsoft Flight Simulator.
My Initial Reaction
The first I heard of this was on Sunday afternoon. I was kicked back in my lazy boy recliner and saw a Facebook post stating something about a new version of Microsoft Flight Simulator 2020. My first thought was someone’s made a YouTube video and in true “click bait” fashion titled it that way and all it will end up being is P3D with a ton of addons. But….but…much to my surprise that was not the case.
The Website
In addition to the E3 announcement, Microsoft has a fancy website and an “Insider Program” already setup to support the announcement. On this website it states, “Microsoft Flight Simulator is the next generation of one of the most beloved simulation franchises. From light planes to wide-body jets, fly highly detailed and stunning aircraft in an incredibly realistic world. Create your flight plan and fly anywhere on the planet. Enjoy flying day or night, and face realistic, challenging weather conditions”.
The Video
Take a Deep Breath and slowly Exhale……
Here’s what we know so far. Not much! It appears Microsoft Flight Simulator will release sometime in 2020. It appears it will be available for both XBOX and Windows 10. It appears (based on the info available) the video was “captured in real-time 4K”. In the grand scheme of things this really isn’t enough information to even warrant talking about it, yet here we are….talking about it! You literally will not find a single flight sim community NOT talking about it. It’s everywhere…yet what we know is…not much!
Opinions, Opinions…
In addition to not really knowing much (at this stage) about this new Microsoft Flight Simulator everyone has opinions. Yes, this includes yours truly. Of course I do! Simply, you can’t have been involved the hobby as long as I have and not have an opinion or three. I’m human…I do and I’m going to share a few of my thoughts with you. Whether you care to read them, agree with them is up to you. Here goes….
Negative Nancy
There seems to be a lot of criticism from some regarding the opinions and comments made by others with regards to this announcement. A lot of what I’m reading which would fall into this category is being made by those who have only been involved in this hobby 5 minutes. They weren’t around a decade or more ago to read/hear about all the things Microsoft Flight Simulator was to become. They weren’t around when the hype surrounding Microsoft Flight could be cut with a knife and the giant sucking sound which occurred when all the excitement evaporated when reality set in.
Most who will read the words I’ve written can be grouped into the hardcore flight simulation community segment. We’ve all grown up through the various iterations of the wonderful Microsoft Flight Simulator product and were all equally let down when it became no more. Yet, we tightened our laces and settled into one of two courts with that being Prepar3D and the second being X-Plane. Some are successfully straddling the fence of both and there’s a small segment which have stayed behind with FSX or FSX Steam Edition and yes, as funny as this may sound….a portion are still stuck on the FS2004/FS9 island. But regardless, we all shed our tears for what was Microsoft Flight Simulator and we’ve moved on. So yes, we have a right to our opinions and we have a right to be somewhat skeptical of this new project.
Niche Community
You’ve often heard myself and others talk about what a niche community we have. It’s true! The flight simulation community isn’t as big as some might want to make it out to be. While competition is a good thing, over saturation isn’t so much. Can our community support three major flight simulation platforms? I’m not so sure, but could Microsoft have a trick up their sleeve?
I Love History
As previously stated, our community is small compared to other popular “gaming”communities. While many of us don’t consider our flight simulation to be a game, by the way it’s not…it’s a simulator. We still get compared to other communities. Anyway….
Despite the fact there are a few other simulator options out there, the two major players at this point in time are Prepar3D and X-Plane. Before we dive too deep in discussing these, let’s take a minute or two for a history lesson.
Microsoft released FSX in 2006 and FSX Acceleration (SP2) a year later 2007.
Microsoft sold the intellectual property (IP) including source code for the commercial use side of FSX SP2 to Lockheed Martin in 2009.
Lockheed Martin released Prepar3d v1 in November 2010.
Microsoft released Microsoft Flight in February 2012 (the same year the Mayans got the end of the world wrong).
In 2014, Dovetail Games announced a license agreement with Microsoft to distribute Microsoft Flight Simulator X: Steam Edition. FSX : SE was released in December 2014.
In 2014, Dovetail Games also announced their plans to develop a “next generation” flight simulation product further developed on Microsoft’s technology and bring this to market in 2015. However, Flight Sim World wouldn’t come to fruition until 2017. In April 2018, Dovetail announced Flight Sim World development would be closed.
In a nutshell, while Flight Sim World was supposed to be the next generation flight simulator product developed on Microsoft technology, the end result wasn’t what the hard core flight simulation community wanted or needed.
Will Microsoft Flight Simulator Take Flight Again?
With the history lesson out of the way, I’ve gotta say that from what I see in the 1 minute and 44 second trailer…I’m amazed, I’m impressed and I’m highly, highly optimistic. Let me repeat that…I’m highly optimistic! But as I stated earlier, what we actually know beyond what our eyes are taking in just isn’t that much. For example….
What about our current add-ons which have been developed for FSX/P3D? Will they work? Who knows. However, if I were to take a really big guess (and that’s all it really is at this point) I would say NO! No, our current add-ons won’t work. Especially not right out of the gate. The next question folks will ponder is, will it cost to get current add-ons for the new sim? We just don’t know.
But let me say this about “our current add-ons”. I constantly see complaints (especially in the FSX/P3D communities) about the fact that P3D is just a rebranding of sorts of FSX. While it is, it also isn’t. Meaning, Lockheed Martin have done some really awesome things to make P3D v4.5 what it is today and P3D v4.5 is truly lightyears from FSX. But…..but…I firmly believe in order for us to truly turn that corner and reach a point that we can say “THIS…THIS RIGHT HERE…Is the next generation flight simulator”, well….we’re gonna have to say goodbye to all those ancient and archaic add-ons we’re so desperately trying to hold onto. Enough is enough.
Having said that, (again because we just don’t know much at this point) will 3rd party scenery actually still be needed? Of the scenes depicted in the short trailer, are we looking at default? If so, dang…that’s impressive for default scenery. But my guess is, out of the box Microsoft Flight Simulator will have some heavily detailed areas and others not so much. But again…we just don’ t know.
The information available today does confirm we can fly anywhere on the planet. So most likely this will be just as inclusive as FSX was. But does this mean every airport, every city, every town will be modeled? Again….we just don’t know. Of course, there is speculation some data might actually be streamed into the sim as one flies along. But at this point we really just don’t know.
But visually impressive/immersive scenery is only part of the equation. The hardcore flight simulation community will also expect the same impressive/immersive experience in the aircraft as well. At this point in time, there’s no evidence proving or disproving this important fact.
Bottom line and this is just my opinion. If (and that’s a really big IF) Microsoft Flight Simulator provides us both the visuals and the level of immersion we have come to expect from Prepar3D and X-Plane, then I believe this could (at some point in the future) live up to being called the next generation flight sim. But can our little community support a big three concept?
The Ace in the Hole
Several years ago I discussed at great depth the confusion surrounding a topic that I’m going to bring up once again. This topic is possibly…the ace in the hole that Microsoft needs to have any success. Obviously, success might simply be “If you build it, we will come”…back. But as I pointed out earlier, it’s gotta be done right. An arcade game isn’t what we’re looking for. But back on topic…
Could Microsoft actually force a change in how Lockheed Martin’s Prepar3D is sold? What am I talking about? Of course, I’m talking about that 800 lb. Gorilla sitting over there in the corner called EULA or End User License Agreement.
Reflecting very briefly on that history lesson from a few moments ago, in 2009 when Microsoft sold the commercial side of FSX to Lockheed Martin the intention was P3D would not be marketed as “Personal Consumer Entertainment” software. However, nothing has prevented individuals like myself to purchase, download, install and use P3D v1, P3D v2, P3D v3 and now P3D v4. While we can make every attempt to pick a few words out of the existing P3D EULA which gives us a right to use the software (training, simulating and learning), the very bottom line is many of us are using P3D for “personal consumer entertainment” purposes only, which is exactly how we all once used Microsoft FSX. My fear is the right set of attorneys in the right courtroom could argue that Lockheed Martin is operating outside of the agreement established by Microsoft. Hey, if an individual was able to sue a fast food establishment (and win) many years ago because the hot coffee she ordered through the drive thru in which she accidentally spilled on herself, then certainly anything might be possible here.
Bottom Line
We simply don’t know much! It looks dang good and if done right, it could be a success and win many of us back to the Microsoft family. This will especially be true depending on Prepar3D v5. Which like MSFS, we also don’t know a lot about. As more information becomes available, I’ll certainly provide my opinion along with everyone else. But just remember…I have my opinions and you will have your opinions. These may be the same, may be similar or might be completely worlds apart. But at the end of the day, they are just that. Opinions!
Thank you for returning for another edition in the “A Pilot’s Life” Storyteller series. I’m still trying to work out the title format I’ll use. For now, I’m going with Series 1, Edition 2. In each of these updates, I’ll spend a little bit of time catching you up on flights I don’t cover in detail. This way you are somewhat aware of the progress I’m making as I continue my APL career.
After arriving at Sea-Tac from our flight from San Francisco (S1, E1), I had a trip out to Salt Lake City and back to Sea-Tac that same day. These two flights increased my APL XP up to 235.20. I have just over 414 XP points to accumulate until I’m eligible for my promotion to the rank of Captain. (See below)
In addition, this trip up to Ketchikan and back will complete this assigned schedule set. As I can’t consider options from other airlines at this time, I’ll need to accept at least one more schedule with Alaska. If you are new to APL or not familiar with how it works, once you accept a position at a new airline or you receive a promotion during your employment with an airline, you can’t accept a new offer until a period of 7 calendar days have passed. As I was promoted to Sr. First Officer on 26 May, I will not be eligible to accept or apply for any other jobs until 2 June.
As for my plan after 2 June, well…..I really don’t know. I first will take a look at the job offers I receive. If these are lucrative enough, I will certainly consider them. The challenge for me is with 3rd party add-on scenery. The add-on airport scenery I own is mostly concentrated in the USA. So accepting a job with any of the major US based carriers will certainly give me plenty of opportunities. However, accepting a job with a European (or any other region) will certainly give me some interesting route opportunities which obviously will lead to some interesting stories to tell. Again…time will tell.
Present Day
The day has come for my flight up to Ketchikan, Alaska. A number of years ago, I spent some time up in Ketchikan piloting small bush and float planes hauling paying customers to secluded hunting and fishing spots. While there isn’t much money to be made (certainly compared to a commercial airline pilot), I could certainly see myself returning back to the slower life which can be found in places like Ketchikan and Juneau at some point in the future. But of course, time will tell.
The flight today is an afternoon flight out of Sea-Tac in the Boeing 737-800. We’re in our special livery titled “Spirit of the Islands”. You can read more about this special livery here or watch the short video below. The livery honors the Aloha State.
The weather today in Seattle is in rare form. Today is one of those days where (while it’s a great day to fly) you are almost wishing you were flying so you can actually get outside and do something. But I need the work as I am still paying off the student loans. The great news is I have arranged for a few days R&R in Ketchikan. I am going to visit some friends for a few days and will catch a flight back to Seattle later in the week. Weather permitting, I might even rent a float plane and do some exploring.
Flight Details
Today we’re operating Alaska flight 179 with non-stop service between Seattle to Ketchikan, Alaska. Our flight is scheduled to depart at 16:30 from gate N13. Our planned fuel for this trip is 17, 111 lbs. and our take-off weight is 148,985 lbs. Our cruising altitude today is FL340 and we have a block time of two hours, three minutes.
Flight Plan: BANGR9 PANGL QQ PR/N0338F 160 V309 ANN
Walk Around
As the turnaround at Sea-Tac is a quick one today, I’m conducting the walk around while the bags are going in. But all looks good with our aircraft today.
Looks like that’s one heavy suitcase. I’d offer him a hand, but you know…union rules and all that. Remember, bend at the knees.
These guys are good. But of course with Sea-Tac being our main hub, you would expect nothing less. Catering, fueling and the last of the bags are going on. Time to get rolling.
It’s time to push back
It’s a busy day today at Sea-Tac. We have company traffic flying in and out, plus an American and Delta are also preparing to pushback.
We’ve been cleared for engine start. Starting Engine #2.
Good engine start on #2, starting engine #1
As we taxi out to 16L, a Virgin America (now of course Alaska Airlines) Airbus lands. I guess we haven’t got around to painting that aircraft just yet.
Alaska 179, Line up and Wait 16L
Positive Rate, Gear Up!
Beginning our right turn to join the SID.
Wing shot…..Oh Yea!
The view from the office.
Climbing out over Vancouver Island. The views are rather impressive this afternoon.
Beginning our descent. We’re about to cross over Annette Island and the Annette Island Airport (ANN) is visible through the clouds. ANN served as the major airport from the WWII era until the early 70’s.
Slowing our speed as we continue to descend. The appearance of the water is very calm.
The approach into Ketchikan for runway 11 brings us in almost parallel to the airport, then fly out approx. 25 nm. Then we do a easy 180 degree turn. Starting to make our turn now.
Looking forward to spending a few days flying around Ketchikan and exploring. The weather forecast is calling for excellent VFR flying conditions.
Completing our 180 degree turn. As we roll out the runway should be directly in front of us.
We’re cleared for the approach runway 11.
Cleared to land, runway 11
Clear of the active and beginning our downhill taxi.
Just as we roll in, a company 737-800 is about to pushback for Anchorage.
At the gate and shutting down. In just a few minutes I’ll begin my short vacation break in one of my favorite places in the world. I think before I head to the hotel, I’ll walk down and see if there are any aircraft to rent.
Well that just about does it for this edition. I certainly hope you are enjoying reading these as much as I’m enjoying flying and writing about my adventures. I hope you’ll check back next week for another adventure. It might just be a mini-adventure as I rent an airplane and fly around Ketchikan before heading back down to Seattle. Talk to you soon.
Credits
If you are interested in experiencing your own “A Pilot’s Life”, I highly recommend the A Pilot’s Life, by SimBitWorld add-on for Prepar3D, FSX and X-Plane. You can learn more about the A Pilot’s Life by visiting the SimBitWorld website and/or purchase APL at SimMarket. Also, please read my full review of A Pilot’s LIfe here.
Flight Simulator: Prepar3D v4.5 (hotfix 1)
Aircraft: PMDG 737-800
Airline: Alaska Airlines (ASA)
ATC: VATSIM
Airport Scenery: KSEA Drzewiecki Design, Orbx Ketchikan
Terrain Scenery: Orbx Global Base, Orbx Vector, Orbx openLC North America, Orbx NA Pacific Northwest, NA Pacific Fjords
Sky/Cloud Textures: REX 5 SkyForce and REX 5 Environment Force
Weather Generation: ActiveSky (ASP4)
Flight Planning: SimBrief, Navigraph, FlightAware, FlightRadar24
Before I get too deep in the weeds with this blog posting, let me first start off by saying a BIG THANK YOU to every single VATSIM member. Regardless if you are a pilot, ATC, supervisor, management, technical development team etc. Thank YOU! I say this because I believe the success of VATSIM is down to each and every one of US. Regardless of how many years you’ve been a member, regardless of how many hours you have accumulated on the network and regardless of your position within the VATSIM network….VATSIM is and always will be successful because of each and every one of us.
Secondly, I do want to call out a few individuals. These are folks I personally didn’t know until recently. But in some way over the past 48-72 hours I’ve interacted with via Facebook, Discord or my own blog site and helped me get everything going so I could participate in the Sunday session of the Audio for VATSIM test during FSExpo19. These individuals are: Matthew Ciafarani, Aidan Stevens, Mats Edvin Aaro and Gary Oliver.
Finally, if you missed the previous blog posting which I detailed all the issues/frustrations I experienced in attempting to get started titled “Audio for VATSIM – FSExpo Beta Bust”, then take a few minutes to bring yourself up to speed and also read the comment left by Gary Oliver. The issues which prevented me (and several others) from joining in on the Saturday testing are explained in Gary’s comment and are all certainly understandable. I earn my living in the IT world and yes…”Stuff” happens. I want to once again state for the record that I didn’t write the FSExpo Beta Bust post as a way to “hate” on VATSIM. I believe it was well received by VATSIM management and serves to document my experiences. That’s it!
Audio for VATSIM
By late Saturday evening I had finished up my running around, completed the chores on the “honey do” list (guys you know this has to be a priority) and settled back in the lazy-boy with a movie in the DVD player and the wife happy. With the help of the folks mentioned above had access to both the Audio for VATSIM (AFV) Discord server and the AFV website. I had the updated vPilot client downloaded and pretty much everything set.
The main testing on Sunday was scheduled to begin at 1330z (7:30 AM MT). I woke up around 6:30 and made my first stop the coffee pot. Nothing ever really happens until I receive my first application of java in the morning. With coffee in hand, I proceeded down to the man-cave and powered on the Beast Mark V and the other PC’s I use for flight sim. My flight sim setup is a little more complicated as I run other applications in a networked setup to offload some of the CPU processing where I can. Anyway, I quickly got the AFV vPilot client installed, configured and installed a brand new Southwest 737-800 livery for the event.
New Southwest B738 in the Heart livery. Parked at KMSY.
The Big Easy
I decided to fly the same flight/route which I had signed up for on Saturday. I loaded up Prepar3D v4.5 and the PMDG 737-800 in the Southwest Airlines “Heart Livery” at the Louis Armstrong International Airport in New Orleans, Louisiana (KMSY). While I didn’t have any ATC at time of departure, I did have company on the ground with an Air Canada Airbus at the nearby gate.
Pushback complete and ready for taxi.
I completely forgot about voice UNICOM, but went ahead and typed my intentions out via text. It wasn’t until I got airborne that I heard another pilot speak on 122.80. I must say, if everyone remains on their best behavior, then voice UNICOM will be awesome.
Southwest Flight 1066 wheels up
Making our left turn to join the departure route. Mississippi river and Lake Pontchartrain in the background.
Once I reached my cruising altitude of FL350 and out over the Gulf of Mexico, I was able to tune into Atlanta Center and could hear through my own headset the new “Audio for VATSIM”. I was blown away.
AFV Benefits
There’s more to the new Audio for VATSIM than what meets the eye EARS. Of course the major benefit has been a long time coming and I’ll discuss more about this in a minute. The two images below represent those who (at the time) were connected to the beta VATSIM server where the FSExpo AFV tests were being conducted. I had just departed from KMSY (climbing through 17,000 for FL350) and you can see my audio range is represented by the red circle around my aircraft position. These circles essentially represent our VHF transceiver range.
Upon reaching my TOC (FL350) my audio range is much greater. With regards to voice UNICOM, I’ll only hear other pilots which fall into my VHF radio range. Likewise, the same applies to picking up ATIS reports. While I initially had my reservations about voice UNICOM, after more thought on the subject I believe it will be a good thing in the long run. Yes, it will get abused…but I also know that VATSIM will hold those who abuse it accountable.
While voice UNICOM does slightly break the immersion for those who fly commercial jets, our level of immersion is also broken anytime we fly today with out constant ATC coverage. Voice UNICOM will certainly be a major benefit to VFR flight, of which I certainly hope to do more of.
ATIS Audio
I’ll let you in on a little secret. For the past several years I’ve actually loathed the ATIS audio. I stopped “listening” to ATIS audio a very long time ago. This doesn’t mean I don’t pickup ATIS info, I just preferred to either receive it via text in vPilot or grab the text info from VATSpy. I know it’s an age thing and I know my ears are paying me back from that Van Halen concert back in the late 1980’s. But wow…what a concert and I wouldn’t trade that experience for anything in the world. But I digress….
Yea…my hearing isn’t what it used to be and the ATIS audio of the past was most like listening to the adults speak on Charlie Brown. If you don’t know what I’m talking about, have a listen to this.
But I’m really pleased to say that with the new audio codec, ATIS audio is very pleasing and easy to understand. Here’s the ATIS info from Mickey Mouse International…err, I mean Orlando International Airport.
Let your ears be the judge
I recorded a short segment of my flight once I reached Jacksonville Center airspace. In the span of approx. 7 minutes, 30 seconds you’ll hear several audio transmissions between ATC, myself (Southwest 1066) and several other pilots. These were all flights arriving into Orlando KMCO during the early stages of testing on Sunday morning.
What do you think?
While there was one pilot with much lower audio levels than anyone else, I could still make out what he was saying. I believe once the new Audio for VATSIM becomes the new normal and everyone has a chance to adjust their audio levels, this new system will truly enhance all the wonderful things about flying in a multiplayer ATC environment.
For me, this is the very best thing to happen to VATSIM in its (and my) 18 year history. While I’ve been amazed at what my eyes have witnessed over the years, the lack of a truly powerful and supportive audio system has been been a major let down. The team responsible for developing and bringing the new Audio for VATSIM into reality deserve very accolade we can give them. Audio for VATSIM will propel the VATSIM network well into the future and beyond.
The Million Dollar Question! When?
As we know, the testing which took place this past weekend during FSExpo19 was not the only testing held for the new audio system. However, this weekends event was by far the largest. From both what my ears experienced as well as what I’ve read on their Discord channel…I don’t think we’re very far away from having AFV into full production. However, at this particular time there have been no firm announcements. We can only speculate if we’re just days/weeks away, more than a month or ???? I have a feeling we’re closer than we might think.
Well, that just about brings this posting to a close. I will have a few blog posting updates this week (pending I find the time to write them). I plan to document my thoughts on a few newsworthy items of recent and will be digging through all the info I can find on product news from FSExpo19.
Before I get started, I want to make clear my intentions as to why I’m writing this particular article. While I’m clearly disappointed, I place blame towards no one.
Like many in the flight simulation community, my time can be limited at the best of times. As an IT Manager, I often work 45-50 hour weeks (and I call that an easy week). The time I carve out for my hobbies (and I have several) also has to share space with the time I spend with my family and often I’ll sacrifice sleep to fit in a flight. After all, I’ll have plenty of time to sleep when I’m dead.
Audio for VATSIM FSExpo test
I first learned about the planned large scale Audio for VATSIM beta test which was being held in conjunction with FSExpo a few weeks ago. I even discussed it here. I was excited. As an individual who has been flying on the VATSIM network since the beginning and someone who has accumulated over 2000 hours (and I realize that’s nothing compared to some other folks), I’m curious to see/hear the future of this wonderful multiplayer platform first hand. I was looking forward to writing about it and had even planned to record some snippits of the audio so you all could hear for yourself, just what we have to look forward to.
If I’m not mistaken, I learned of the FSExpo AFV test via a Facebook post on the VATSIM FB page. The announcement was a accompanied by a fancy graphic (see below) and the graphic linked you to a webpage which had been especially created just for the event/testing.
Last weekend (1 June), the organizers of this even opened up the availability for anyone who was interested, paying attention etc. to go out and book slots for this event. Those who were successful at booking a slot would automatically be entered into the beta and could experience the new Audio for VATSIM system. I set aside some time last weekend and promptly when the time arrived, I booked my slot for early Saturday morning (12:20z 6:20 AM MT) from KMSY to KMCO (New Orleans to Orlando).
It’s all about the details
As a guy who truly understands “details”, I read everything I could on the AFV FSExpo website. The VATSIM team made it clear that “Routing information would be available 6-12 hours before the event”. I also read through the list of FAQ’s. (posted below)
What is this thing? Beta testing of our new Audio For VATSIM solution of course! We’ll be live at FSExpo beta-testing and demonstrating our new solution, book a flight to join us!
Who can book a slot? Any VATSIM member in good standing can book a slot! You DO NOT need to have already participated in a beta test. All who book a slot will be added to the beta.
When is this going down? June 8th and 9th. Check the home page for a fancy little countdown!
Where can I fly? You can book a slot between any of the event airports listed on the bookings page. The live portion will be taking place at FSExpo in Orlando.
Do I need to be at FSExpo to participate? Nope! You can fly at home in your pajamas!
Why are you guys doing this? We want to give you, the membership, an opportunity to experience what we’ve got in store and give us valuable feedback so that we can deliver the best voice solution possible.
Can I have a refund? Nope!
Nothing in the FAQ’s or on the website mentioned anything about how/where to get the software for the beta nor did it state anything about joining a special Discord server.
On Friday evening (the eve before the event), I kept checking the website and even as late as 10:30 PM, hadn’t received any email regarding the routing or anything else. Since I had got up at 4:30 AM that morning, I was pretty exhausted and went to bed just after 10:30 PM. I set my alarm for 5:00 AM Saturday morning and figured and hour and 20 minutes would be enough time to pour some coffee down my throat and get everything setup.
Cockle Doodle Doo
No, I don’t have a rooster. But the alarm went off as planned and I got up and proceeded downstairs to the coffee pot. Like a good coffee pot, it had already warmed up the water and all I needed to do was insert the K cup and pull the handle. Within 60 seconds I’d have a cup of strong, black coffee. Ahhhhhh…OK the day can begin.
I grabbed my laptop and pulled up my email client. I had a total of six emails from VATSIM which had arrived just before midnight. (see below)
The first one (booking confirmation) while only received today, should really have been received last weekend when I booked the flight and the other five emails are just duplicates of each other and instructing me of my route and a link to pre-book the flight.
Dancing in the Dark
I’ll admit, I honestly wasn’t entirely sure how this beta test event would work. While I assumed I would need to download/install something…I also thought that it might be possible that the VATSIM folks in some “behind the scenes” process and based on my VATSIM PID could route my connection to the beta system. Like I said…I didn’t know and I remind you of the FAQ above, nothing there stated anything which could be helpful in better understanding this.
#BLAMEAIDAN
Things really didn’t start to go sideways until I attempted to pre-file my flight plan via one of the above 5 emails and the embedded link they contain. When trying to pre-file, I received a pop-up error stating I wasn’t logged in (even though I was) and the hashtag of #BLAMEAIDAN.
I’m Not Alone
I don’t think I’m alone in my confusion. In the days leading up to this event, I saw many posts on the VATSIM Facebook page asking “how will we be informed” and all replies more of less stated an email will be received 6-12 hours before the event. Nothing was ever mentioned about Discord.
Bottom Line
I’m not upset….no, really! I’m not. Many of the VATSIM folks working on the beta replied to my Facebook post and offered their assistance. However, by this time it was already 15 minutes past my departure time I realized I wouldn’t have time to install the beta client and get my flight all setup again and also fly it (assuming there would be delays etc.) and also meet my Saturday morning commitments.
Instead, my reason for writing this is A. to document my overall experience in exactly what I encountered in the days/hours leading up to the event and I suppose B. to also set my mind (and anyone else) who feels they too were very much in the dark on exactly what to expect and when to expect it. I have a feeling (through no fault of those wanting to participate) that not everything went off exactly as planned on the VATSIM side.
My hope is this Audio for VATSIM test today during FSExpo is 1000% successful and I hope that the timeframe of when AFV will become reality for ALL is very, very short. The old audio codec needs to be put out to pasture and soon.
Thanks for reading and I hope you have a wonderful Saturday.
Until next time….
Happy Flying!!!
Jerry
P.S. If you are still reading (and I hope you are), don’t forget to come join my new Flight Sim Helpers Facebook community. The goal with Flight Sim Helpers is to …..well….HELP those who might need it. The flight sim hobby has been very good to me and I’m just wanting to give something back. Also, take the time to bookmark the Flight Sim Helpers website where many helpful FAQ’s are being added with more to come.
But he’s headed for Sitka, so he’ll be turning and proceeding NW soon.
